Recessed & Surface Mounted PIR
This ceiling-mounted, human motion infrared sensor can either be embedded in the ceiling or mounted on a flat surface, making installation flexible and versatile and is powered by a CR123A battery (or can be wired for AC power).
When the sensor is paired with a wireless controller, a light source can be switched on by wireless control upon detection of a presence and then switched off again once no presence is detected.
The sensor comes ready to be recess mounted- if the ceiling-mounted version of the sensor is required, the sensor can be detached from the recessed base by pressing on the clips at both ends of the base.
The sensor comes ready to be recess mounted- if the ceiling-mounted version of the sensor is required, the sensor can be detached from the recessed base by pressing on the clips at both ends of the base.
This sensor solution is suitable for use in homes, classrooms, offices, warehouses, etc.
- Power supply: CR123A battery (supplied) or AC100-240V 50/60Hz
- Communication frequency: RF 433M
- Communication distance: 30m (indoor)
- Area covered: 30 m2 (324 ft²) – 62 m2 (676 ft²)
- Mounting height: 8-12ft (2.44-3.66m)
- Detection range (adjustable): 0-8m (detection radius 4m)
- Light range (adjustable): 10-2000lux
- Time range (adjustable): 3 seconds – 30 minutes
- Detection angle: 360°
- Indicator light: Red (pairing indicator/low battery alert)
- Mounting method: Recessed – Positioning spring fixing
Flush mounted – Snap-on fixing to base - Operating temperature: -10°C ~ +50°C
- Indoor use only
- 5-year battery life (if using)
Recessed & Surface Mounted PIR
This ceiling-mounted, human motion infrared sensor can either be embedded in the ceiling or mounted on a flat surface, making installation flexible and versatile and is powered by a CR123A battery (or can be wired for AC power).
When the sensor is paired with a wireless controller, a light source can be switched on by wireless control upon detection of a presence and then switched off again once no presence is detected.
The sensor comes ready to be recess mounted- if the ceiling-mounted version of the sensor is required, the sensor can be detached from the recessed base by pressing on the clips at both ends of the base.
The sensor comes ready to be recess mounted- if the ceiling-mounted version of the sensor is required, the sensor can be detached from the recessed base by pressing on the clips at both ends of the base.
This sensor solution is suitable for use in homes, classrooms, offices, warehouses, etc.
