2 Way/Centre-Off Retractive Switch Compatible with MK Logic Grid
The Kinetic wireless grid switch is compatible with the MK grid plus system and can be installed into MK grid plus plates.
It has a built-in micro energy generator – when the switch is pressed the kinetic system transforms the movement into energy.
This transmits a signal to the receiver to turn the lamp or other load on or off.
It could be used to operate an electronic blind, ie ‘up’ to raise the blind and ‘down’ to lower it. The switch is sprung to always reset to ‘off’ in the center. It will also allow for both an ON/OFF option or a dimming action depending on the wireless receiver used to pair it. Can be used alongside mains voltage grid switches.
The KGDMKR switch was specially made for the curtain/shutter receiver, as it pairs automatically to both up and down channels.
If used with other receivers, it will act as a 2-gang switch and the gangs can be paired separately.
Specifications:
- 2 position, center off retractive push switch.
- Power source: Micro Energy Acquisition and self-powered.
- Operate range: 80m (Outdoor) / 25m (Indoor).
- Communication frequency: RF433MHz.
- Operating temperature: -20°C~55°C.
- Compatible with MK Logic Grid Plates.
- Projected lifespan: >100000 uses.
2 Way/Centre-Off Retractive Switch Compatible with MK Logic Grid
The Kinetic wireless grid switch is compatible with the MK grid plus system and can be installed into MK grid plus plates.
It has a built-in micro energy generator - when the switch is pressed the kinetic system transforms the movement into energy.
This transmits a signal to the receiver to turn the lamp or other load on or off.
It could be used to operate an electronic blind, ie 'up' to raise the blind and 'down' to lower it. The switch is sprung to always reset to 'off' in the center. It will also allow for both an ON/OFF option or a dimming action depending on the wireless receiver used to pair it. Can be used alongside mains voltage grid switches.
The KGDMKR switch was specially made for the curtain/shutter receiver, as it pairs automatically to both up and down channels.
If used with other receivers, it will act as a 2-gang switch and the gangs can be paired separately.
