RT Transmitter
It is beneficial when the target load is connected to a different circuit in another part of the building/site.
The transmitter has two independent channels and works like a Kinetic switch, the difference between them being the capability of the transmitter to be triggered by external equipment rather than manual human operation.
After the RF transmitter is paired with the wireless receiver, it will send a wireless signal ON to the receiver when either of the S1/S2 live lines receives the input signal. It will send an OFF signal to the wireless receiver when either of the S1/S2 input lines is disconnected.
Each RF transmitter can be paired with multiple wireless receivers.
It can be mounted in the ceiling, wall, electrical socket box, behind an electrical switch (N required), etc.
– Relay contacts on intruder alarms or PLC systems like KNX to wirelessly turn ON lighting
– Status contacts on ambient or surface thermostats to wirelessly operate heating pumps, 3-way valves, solenoid valves, immersion elements, boilers, etc
-Status contacts on existing hardwired photocells or PIR sensors to wirelessly operate lighting or other electrical equipment like good pumps, gate locks, gate motors, etc
-Status contacts on flow or pressure sensors to wirelessly operate shower pumps
-Status contacts on water/fluid level sensors in storage tanks to wirelessly operate visual indicators and suction pumps
-To convert any existing hardwired switches into Quinetic switches (very useful when switches from different makes, or with particular finishes, are in place)
- Can be paired with an unlimited number of Quinetic receivers
- Operating voltage: AC100V -240V 50/60Hz
- Power supply: Live & Neutral
- Wiring method: Screw terminals
- Communication rate: 100 Kbps
- Communication method: RF 433MHz
- Communication distance: 80m (Outdoor)/ 30m (Indoor)
- Standby power consumption: <1W
- Communication channels: Dual channel with LED indicators (Red & Green)
- Signal input: 2 Channels Live Line Input
- Operating temperature: -20°C ~ +55°C
- IP Rating: IP20
RT Transmitter
The Kinetic RF Transmitter is a device that sends an RF signal and wirelessly operates (ON/OFF) any Kinetic receiver whenever voltage is applied to it.
It is beneficial when the target load is connected to a different circuit in another part of the building/site.
The transmitter has two independent channels and works like a Kinetic switch, the difference between them being the capability of the transmitter to be triggered by external equipment rather than manual human operation.
After the RF transmitter is paired with the wireless receiver, it will send a wireless signal ON to the receiver when either of the S1/S2 live lines receives the input signal. It will send an OFF signal to the wireless receiver when either of the S1/S2 input lines is disconnected.
Each RF transmitter can be paired with multiple wireless receivers.
It can be mounted in the ceiling, wall, electrical socket box, behind an electrical switch (N required), etc.
